 Can Pixy send image to a microcontroller like Raspberry pi and Raspberry pi?
By : fillmember
Date : March 29 2020, 07:55 AM
will help you The Pixy camera was not intended for it. While it's possible to get images or streaming video by creating your own hardware-level API, the added complexity and time spent would be better served just using the official Pi Camera module which is natively supported and has a very friendly and robust API.
|
 How to install ChromeDriver or Gekodriver in Ubuntu MATE for the Raspberry Pi 2 and Raspberry Pi 3
By : J Doe
Date : March 29 2020, 07:55 AM
should help you out I was able to solve the problem using below steps Install Firefox Web browser code :
sudo apt-get install firefox
cd /usr/local/
wget https://github.com/mozilla/geckodriver/releases/download/v0.15.0/geckodriver-v0.15.0-arm7hf.tar.gz
tar -xvzf geckodriver*
chmod +x geckodriver
export PATH=$PATH:/usr/local/geckodriver
System.setProperty("webdriver.gecko.driver", "/usr/local/geckodriver");
webDriver = new FirefoxDriver();
|
 I am using Raspberry PI + BHI 160 shuttle board + BMM150,How to get data from sensors into Raspberry PI using any binary
By : Paul S
Date : March 29 2020, 07:55 AM
This might help you The code you linked to is driver code for taking directly to the BMI160, the BHI160 is a BMI160 with a microcontroller. The Shuttle Board's communication is with the microcontroller, not the BMI160 - so that code many not help you. The BHI160 has an I2C interface. For details of how to access the I2C on RPi see this tutorial. Then you should perhaps look at the documents and driver code at the product's web page for how to actually use the device. They include a link to examples and driver, with a doc folder that includes a driver porting guide (i.e how to hook the BHI160 driver with teh RPi i2C driver and other platform specifics).
|
 c# mono raspberry pi GPIO with Raspberry# getting Operation is not valid
By : psm
Date : March 29 2020, 07:55 AM
hope this fix your issue Execute your Mono program as root. /dev/mem is not accessible to normal users.
|
 GPIO 3.3v output on raspberry pi 'The channel sent is invalid on a Raspberry Pi'
By : Sopetajo
Date : March 29 2020, 07:55 AM
I wish did fix the issue. http://sourceforge.net/p/raspberry-gpio-python/wiki/BasicUsage/Check out the section "Pin Numbering". You can either number the GPIOs according to the pin that's on the chip that contains the GPIO (the BCM numbering), or the number that's on the pin header you connect to (the BOARD). If you want GPIO17, that's the BCM pin number and it's pin 11 on the board header. You don't want board pin 17, because that is not a controllable output; it's the 3.3V supply.
|
» 
code :
Related Posts :